HOW TO MAKE AN AR-15 FULLY AUTOMATIC?
By Ar-15 is a rifle that is not used in wars due to its property of being semi-automatic. An automatic gun is defined as a gun that continuously fires bullets until the trigger is left. Civilians are not allowed to use or equip machine guns. In the United States, civilians are allowed to keep machine guns that were made before 1886. Under the Firearm Owner Act of 1886, a civilian cannot legally buy this weapon.
HOW TO MAKE AN AR-15 FULLY AUTOMATIC CORRECTLY?
This article will discuss some steps through which an AR-15 can be converted into a machine gun. We don’t know whether, in other countries, it is legal or not. So you should first find it out and then start the process. Making an automatic AR-15involvesattaching some parts to the gun and detaching some parts. To ensure that no problem occurs, you should follow all the steps given below under that specific heading.
Important Info
[sc name=”amznative” ]There are some notices that you need to know before making any rifle fully automatic.
- Your health is the most crucial concern for us. So check twice and then recheck the gun to make sure it is not loaded.
- You should check properly that the machine guns are allowed for a civilian person to use or not. If not, you are responsible for all the legal actions taken by the government against you.
- You can also be fined $ 250,000 and can be sentenced to 10 years of prison. If you will violate any law and are caught violating it, the results will be nothing except regretting.
Ways to make AR-15 fully automatic
We will tell you the easiest and simple ways to convert a gun into a fully automatic machine gun. There are no easy ways of converting an AR-15 to fully automatic. We searched a lot and got some ways that are not easy. But, they can convert a semi-automatic AR-15 into an automatic one.
1. Bump stock
[sc name=”in-content” ]The plus point of this technique is that it is inexpensive and pretty easy. It only needs your attention and doing all the steps as they are explained. Installing a bump stock can significantly make any gun a machine gun. As it provides many rounds in a single trigger pull, it is the same mechanism that is adopted in machine guns.
You just have to replace the regular stock of the gun with this stock. It does not make the gun fully automatic but can provide two to three rounds or even a magazine. It is not an official legal method in the United States. The United States has banned all the ways that are achievable for the people to make machine guns to ensure citizens’ safety.
2. AR-15 Auto Sear
It is an expensive method because of the 1986 machine gun ban. It may cost you $ 15-20,000, but it is the safest method. There is a product that is also called a drop in auto sear. It is a standard method, but you have to get the drop-in auto seer registered. After you have got a registered auto seer, the other things that you will need are
- An M-16 fire control group
- An M-16 bolt carrier
- It is an M-16 hammer because a normal AR-15 will not work in the same way an M-16 hammer does.
After you have got all the things required, if you disassemble the receiver, put the auto seer in the lower receiver. It will fit properly, and then assemble the gun, and you are ready to try an AR-15 as a machine gun.
Watch this video to get more information about making an AR-15 machine gun.
Conclusion
It is sad for guns and hunting lovers to know that machine guns are banned. But, there are many ways through which you can make a machine gun. It requires some effort, and in some cases, it may require more than just effort. Some processes that are used for making a machine gun require your time as well as a considerable amount of money.
In this article, we have discussed to make a machine gun through bump stock and an auto seer. The bump stock method is a cheap one and cannot be compared with the auto seer method. Installing a bump stock may not act in the same way as the auto seer method works. In the auto seer method, AR-15 has unique installations of M-16 that enable it to provide you the best experience of machine-gun even if you don’t have one.
There are many ways through which you can make a machine gun using an AR-15. We would suggest looking for a machine gun that was registered before 1886. The government allowed the machine guns owner to keep the guns that were registered before the ban. [sc name=”faq3questions” q1=”How to make an AR-15 fully automatic?” a1=”There are no easy ways of converting an AR-15 to fully automatic. We searched a lot and got some ways that are not easy…” q2=”AR-15 Auto Sear” a2=”After you have got a registered auto seer, the other things that you will need are: An M-16 fire control group..” q3=”Bump stock method” a3=”The bump stock method is a cheap one and cannot be compared with the auto seer method. Installing a bump stock may..” ]
